抽搐一进一出GIF日本_成人H视频在线观看_小柔在公厕被灌满JING液_乱VODAFONEWIFI熟妇

東莞市廣豐聯泰塑料有限公司

專供PC+ABS 沙伯基礎PC 德國拜耳PC+ABS 寶理PPS LCP

產品分類
聯系方式
友情鏈接
您當前的位置：首頁 » 新聞中心 » 擠壓阻燃 PBT VALOX ? Resin V3500EX
新聞中心
擠壓阻燃 PBT VALOX ? Resin V3500EX
發布時間：2016-04-19        瀏覽次數：272        返回列表
 

VALOX ? Resin V3500EX

SI | British | Metric | PDF Europe-Africa-Middle East: COMMERCIAL

 
Unfilled PBT,Flame Retardant, good flow, high elongation at break for Extrusion applications (Monofilaments, Insulation Cables),Electrical Parts and Connectors
 

Property
 
TYPICAL PROPERTIES (1)
MECHANICAL Value Unit Standard
Tensile Stress, yld, Type I, 50 mm/min 610 kgf/cm2 ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min 400 kgf/cm2 ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min 3 % ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min 15 % ASTM D 638
Tensile Modulus, 50 mm/min 31600 kgf/cm2 ASTM D 638
Tensile Stress, yield, 50 mm/min 60 MPa ISO 527
Tensile Stress, break, 50 mm/min 50 MPa ISO 527
Tensile Strain, yield, 50 mm/min 3 % ISO 527
Tensile Strain, break, 50 mm/min >70 % ISO 527
Tensile Modulus, 1 mm/min 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 95 MPa ISO 178
Flexural Modulus, 2 mm/min 2850 MPa ISO 178
Hardness, H358/30 170 MPa ISO 2039-1
Hardness, Rockwell R 118 - ISO 2039-2
IMPACT Value Unit Standard
Charpy Impact, unnotched, 23°C 95 kJ/m2 ISO 179/2C
Charpy Impact, unnotched, -30°C 80 kJ/m2 ISO 179/2C
Izod Impact, unnotched, 23°C 96 cm-kgf/cm ASTM D 4812
Izod Impact, unnotched, -30°C 84 cm-kgf/cm ASTM D 4812
Izod Impact, notched, 23°C 4 cm-kgf/cm ASTM D 256
Izod Impact, notched, 0°C 4 cm-kgf/cm ASTM D 256
Izod Impact, notched, -30°C 4 cm-kgf/cm ASTM D 256
Izod Impact, unnotched 80*10*4 +23°C 60 kJ/m2 ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 60 kJ/m2 ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 6 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 0°C 6 kJ/m2 ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 6 kJ/m2 ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 5 kJ/m2 ISO 179/1eA
Charpy Impact, notched, 23°C 6 kJ/m2 ISO 179/2C
Charpy Impact, notched, -30°C 5 kJ/m2 ISO 179/2C
THERMAL Value Unit Standard
Vicat Softening Temp, Rate A/50 220 °C ASTM D 1525
Vicat Softening Temp, Rate B/50 180 °C ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed 165 °C ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed 80 °C ASTM D 648
CTE, -40°C to 40°C, flow 6.01E-05 1/°C ISO 11359-2
CTE, -40°C to 40°C, xflow 7.4E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, flow 1.9E-04 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 1.42E-04 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 220 °C ISO 306
Vicat Softening Temp, Rate B/50 180 °C ISO 306
Vicat Softening Temp, Rate B/120 180 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 165 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 80 °C ISO 75/Af
Relative Temp Index, Elec 75 °C UL 746B
Relative Temp Index, Mech w/impact 75 °C UL 746B
Relative Temp Index, Mech w/o impact 75 °C UL 746B
PHYSICAL Value Unit Standard
Specific Gravity 1.5 - ASTM D 792
Mold Shrinkage on Tensile Bar, flow (2) (5) 1.1 - 1.8 % SABIC Method
Mold Shrinkage on Tensile Bar, xflow (2) (5) 0.9 - 1.8 % SABIC Method
Melt Flow Rate, 265°C/5.0 kgf 50 g/10 min ASTM D 1238
Melt Flow Rate, 266°C/5.0 kgf 50 g/10 min ASTM D 1238
Density 1.5 g/cm3 ISO 1183
Water Absorption, (23°C/sat) 0.35 % ISO 62
Moisture Absorption (23°C / 50% RH) 0.08 % ISO 62
Melt Volume Rate, MVR at 250°C/2.16 kg 13 cm3/10 min ISO 1133
Melt Volume Rate, MVR at 250°C/5.0 kg 13 cm3/10 min ISO 1133
Melt Volume Rate, MVR at 265°C/5.0 kg 40 cm3/10 min ISO 1133
Melt Viscosity, 260°C, 1500 sec-1 170 Pa-s ISO 11443
ELECTRICAL Value Unit Standard
Volume Resistivity >1.E+15 Ohm-cm ASTM D 257
Dielectric Strength, in oil, 1.6 mm 39 kV/mm ASTM D 149
Dielectric Strength, in oil, 3.2 mm 21 kV/mm ASTM D 149
Relative Permittivity, 1 MHz 2.9 - ASTM D 150
Dissipation Factor, 1 MHz 0.016 - ASTM D 150
Volume Resistivity >1.E+15 Ohm-cm IEC 60093
Surface Resistivity, ROA >1.E+15 Ohm IEC 60093
Dielectric Strength, in oil, 0.8 mm 62 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 39 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 21 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 2.9 - IEC 60250
Dissipation Factor, 1 MHz 0.016 - IEC 60250
Comparative Tracking Index 225 V IEC 60112
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant, 94V-0 Flame Class Rating (3)(4) 0.8 mm UL 94 by SABIC-IP
Source GMD, last updated:2012/12/19
Processing

Parameter
Injection Molding Value Unit
Drying Temperature 110 - 120 °C
Drying Time 2 - 4 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 250 - 270 °C
Nozzle Temperature 240 - 260 °C
Front - Zone 3 Temperature 245 - 265 °C
Middle - Zone 2 Temperature 240 - 255 °C
Rear - Zone 1 Temperature 230 - 245 °C
Hopper Temperature 40 - 60 °C
Mold Temperature 40 - 100 °C
Source GMD, last updated:2012/12/19
 
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
 
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

轉載請注明：轉載自環球塑化資訊網 http://647cq.com/news/
本文鏈接：http://647cq.com/b-shabo/news269617/
免責聲明：本文"擠壓阻燃 PBT VALOX ? Resin V3500EX"僅代表作者個人觀點，與環球塑化網無關。環球塑化網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡。電話：400-115-2868

機械手 激光機
©2024 環球塑化網 版權所有   技術支持： 環球塑化網     訪問量：526365  管理入口

收縮

  • 電話咨詢

  • 0769-82558310
QR code
關閉
關閉
請輸入驗證碼